65 Ton
“Jaws V” Ironworker

$13,396

PUNCH
Max. Capacity	1-1/16" dia. in 3/4" plate
Work Height	36"
FLAT BAR SHEAR
Max. Width	3/8" x 24"
Max. Thick.	1/2" x 14" or 1" x 4"
Max. Round	1"
Max. Square	1"
Work Height	33-1/2"
ANGLE SHEAR
Max. Size	5" x 5" x 1/4" or 4" x 4" x 3/8"
Work Height	42"
COPER/NOTHCER
Max. Capacity	2-1/2" x 6" x 3/8"
Work Height	35-1/2"
OPEN CAVITY
Specifications	11-1/2" wide x 9-3/4" tall
Work Height	42"
OPTIONS
Tooling and Accessories	Oversized Punching Assembly Angle Notcher Pipe Notcher (shown) Brake Multi Shear Rod Shear 241 Punch Assembly Back Gauge Gauging Table Pedestal Die Table Magna Light Urethane Stripper Electric Stroke Control (shown)

GENERAL SPECS
Rated Capacity	65 ton
Throat Depth	9-3/4"
Open Height	8-1/8"
Shut Height	6-3/4"
Stroke	1-3/8"
Cycle Time	2 seconds
Electric Motor Standard	5 HP, 3 Phase, 208/240 v, 1725 rpm, 14 amp
Electric Motor Options	5 HP, 3 Phase, 440/480 v or 575 v, 7 amp, 5 HP, 1 Phase, 208/240 v, 1725 rpm, 26 amp
Hydraulic Pump Size	10-1/2 gpm - 2 stage
Valve Pressure	2800 psi
Reservoir	17 gallons
Cylinder	3-1/2" ram
Dimensions: Base	43" x 42"
Height	55"
Shipping weight	4220 pounds