55 TON IRONWORKER

$7,896

The Edwards 55 Ton Ironworker is well suited to fit the needs of any fab shop, large or small. Standard features include a Punch Assembly with Pedestal Die Table, Flat Bar Shear, Angle Shear, and a universal open tooling station designed to accept optional Tooling Accessories.

The optional Hydraulic Accessory Pack allows your Ironworker to act as a power source to our expanding line of innovative Hydraulic Accessory Tools, such as the 10 Ton Tube/Pipe Bender, 20 Ton Shop Press, and 40 Ton Shop Press.

Shown with optional Angle Notcher tooling.

ANGLE SHEAR
MAX. SIZE	4" x 4" x 1/4" or 3" x 3" x 3/8"
WORK HEIGHT	40"
OPEN STATION
THROAT DEPTH	7"
OPEN HEIGHT	8"
SHUT HEIGHT	6-3/4"
WORK HEIGHT	35-1/4"
GENERAL SPECIFICATIONS
STANDARD MOTOR	5 HP 3 PHASE 208/240v 1725 RPM 14 AMP
OPTIONAL MOTORS	5 HP 3 PHASE 440/480v 1725 RPM 7 AMP 5 HP 3 PHASE 575v 1725 RPM 7 AMP 5 HP 1 PHASE 208/240v 1725 RPM 26 AMP
HYDRAULIC PUMP	3-1/2 GPM - 1 STAGE
VALVE PRESSURE	2500 PSI
RESERVOIR	7 GALLONS
CYLINDER	2-1/2" Ram

ANGLE SHEAR
MAX. SIZE	102mm x 102mm x 6mm or 76mm x 76mm x 10mm
WORK HEIGHT	1016mm
OPEN STATION
THROAT DEPTH	178mm
OPEN HEIGHT	203mm
SHUT HEIGHT	171mm
STROKE	32mm
WORK HEIGHT	895mm
GENERAL SPECIFICATIONS
STANDARD MOTOR	5 HP 3 PHASE 208/240v 1725 RPM 14 AMP
OPTIONAL MOTORS	5 HP 3 PHASE 440/480v 1725 RPM 7 AMP 5 HP 3 PHASE 575v 1725 RPM 7 AMP 5 HP 1 PHASE 208/240v 1725 RPM 26 AMP
HYDRAULIC PUMP	13.25 LPM- 1 STAGE
VALVE PRESSURE	17236.9 kPa
RESERVOIR	26.5L
CYLINDER	64mm Ram