55 Ton
“Jaws IV” Ironworker

$7,296

PUNCH
Max. Capacity	1-1/16" dia. in 5/8" plate
Work Height	37-1/2"
FLAT BAR SHEAR
Max. Width	1/2" x 12" or 3/8" x 14"
Max. Thick.	3/4" x 4"
Max. Round	7/8"
Max. Square	7/8"
Work Height	34-3/4"
ANGLE SHEAR
Max. Size	4" x 4" x 1/4" or 3" x 3" x 3/8"
Work Height	40"
OPEN STATION
Throat Depth	7"
Open Height	8"
Shut Height	6-3/4"
Stroke	1-1/4"
Work Height	35-1/4"
OPTIONS
Tooling and Accessories	Oversized Punching Assembly Coper Notcher (shown) Angle Notcher Pipe Notcher Brake Multi Shear Rod Shear 241 Punch Assembly Back Gauge Gauging Table Pedestal Die Table Magna Light Urethane Stripper Electric Stroke Control

GENERAL SPECS
Rated Capacity	55 ton
Throat Depth	7-1/2"
Open Height	8"
Shut Height	6-3/4"
Stroke	1-1/4"
Cycle Time	2 seconds
Electric Motor Standard	5 HP, 3 Phase, 208/240 v, 1725 rpm, 14 amp
Electric Motor Options	5 HP, 3 Phase, 440/480 v or 575 v, 7 amp, 5 HP, 1 Phase, 208/240 v, 1725 rpm, 26 amp
Hydraulic Pump Size	3-1/2 gpm - 1 stage
Valve Pressure	2600 psi
Reservoir	7 gallons
Cylinder	2-1/2" ram
Dimensions: Base	36" x 42-1/2"
Height	59"
Shipping weight	2350 pounds